Table of Contents

If you haven’t yet, I encourage you to read through Part 1 , Part 2 , and Part 3 of this series, where we worked to create a disk image of our TiVo drives, and get VirtualBox installed and configured, extracted and transcoded video from our TiVo.

This final chapter of the TiVo hacking series is a listing of the various tool, tips and tricks I picked up along the way. There’s really no other purpose other than to provide the resources I found useful along the journey.

Vintage TiVo (Series 1 or 2) Online Resources

Vintage TiVo (Series 1 or 2) Software

Creating VirtualBox VMDKs

  • Convert a Linux dd image file to a VMDK for use in VirtualBox:
VBoxManage convertfromraw $source_file.img $destination_file.vmdk --format VMDK
  • Create a new VMDK file, which uses the Linux dd image as it’s backing store:
VBoxManage internalcommands createrawvmdk -filename $vmdk_filename -rawdisk $source_file.img

Mounting a Partitioned Linux Disk Image

Assume you created a Linux disk image using dd or ddrescue, which contains a partition and a known filesystem (e.g. ext[2,3,4]). The following steps will allow you to mount a partition from within this disk image to access the data:

  • sudo fdisk -lu $disk_image.img

    • Take note of the Start and Sectors columns

  • sudo losetup --offset $((512*63)) --sizelimit $((512*(40959071-63+1))) --show --find disk_image.img

  • The losetup --offset command is in the format of: losetup --offset $((sector size * Start)) --sizelimit $((sector size * (End - Start + 1)))

  • This will return a loop device number

  • sudo mkdir /mnt/disk-image

  • sudo mount /dev/loopX /mnt/disk-image

  • When finished with the device: losetup -d /dev/loopX

Mounting a Partitioned Linux Disk Image
Mounting a Partitioned Linux Disk Image

Customizing the TiVO BATBD ISO Image

The BATBD CD was included with both the 1st and 2nd editions of Bill von Hagen’s “Hacking the TiVo” books. Bill generously made the first version of this CD available via his website , and the steps listed here allow you to customize this CD to include additional software or configurations you may find useful.

Note

Keep in mind, this CD was created around 2003, so the kernel and software running in this CD are dated.

  • export TIVO_HOME="$HOME/tivo"

  • mkdir -p $TIVO_HOME/batbd-new

  • sudo mkdir /mnt/iso

  • sudo mount -o loop BATBD.iso /mnt/iso

  • cp -a /mnt/iso/* $TIVO_HOME/batbd-new or clone the Github repo listed above, the contents are identical to what’s contained within this ISO image.

  • vi $TIVO_HOME/batbd-new/isolinux/isolinux

  • Customize as you wish. For example I created a variant of the s1swap boot option, only byte-swapping the two devices I know to be TiVo MFS disks:

label mytivo    kernel s1swap    append hdc=bswap hdd=bswap initrd=initrd1.img
 load_ramdisk=1 prompt_ramdisk=0 rw root=/dev/ram

Adding Additional Software to the TiVo BATBD ISO Image

Note

All the default software available on the CD is stored within the initrd1.img kernel image. You can add additional software to this (soon to be) ISO image, but we’ll have to take some extra steps to access it later. The BATBD image is running kernel version 2.4, and is 32-bit. Additionally, there are no gcc-like tools on this live CD, so you’ll have to build and compile any additional utilities you need before copying into this live CD.

Copy any additional software you want to have access to into $TIVO_HOME/batbd-new/

Creating a new TiVi BATBD ISO Image

To create a new ISO image, we’ll be using the mkisofs Linux utility:

$ cd $TIVO_HOME/batbd-new/
$ mkisofs -o new_iso.iso -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 5 -boot-info-table -iso-level 2 ./
  • You can now use new_iso.iso in your VirtualBox VM, as you would have the original BATBD CD Image.
  • To access the additional software you burned into this image, you must mount the CD once booted into the OS:
    • mount -o loop /dev/cdrom0 /mnt
    • All newly installed software can now be accessed from /mnt/